StoreVirtual Storage
1748140 Members
3406 Online
108758 Solutions
New Discussion

Lefthand SRA Array Manager IP Addresses

 
Steven Clementi
Honored Contributor

Lefthand SRA Array Manager IP Addresses

I have not been able to find too many documents concerning best practices when it comes to specifying the IP Addresses for my SRA configuration... when I have a multi node Lefthand Cluster.

Current configuration:

Protection Site - 4 LH nodes, VC/SRM Server
Recovery Site - 2 LH Nodes, VC/SRM Server

In this case, should I specify the Virtual IP address of the cluster in each site as the first manager?

What about the second manager IP Address? Should I use the node addresses of each node? or should I use the VIP again?

Or should I not use the VIP at all and for both fields, specify the node addresses?

Any documentation for Multi Node Clusters you can point me too would be great.


Steven Clementi
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
1 REPLY 1
Steven Clementi
Honored Contributor

Re: Lefthand SRA Array Manager IP Addresses

The short answer is/was... direct from the horses mouth:

Use the addresses of the individual node general manager's NOT the VIP Address at all.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)