HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

Multi-site NSM in Sync?

JKersey
Occasional Contributor

Multi-site NSM in Sync?

I had a little hardware failure this weekend and had to basically shutdown one of my NSM waiting for HP to deliver the replacement parts (P400 Smart Array - Cache and BBU). I got the unit back online after being offline for about 16 hours. Lucky the traffic over the weekend is low so not much new data is created on the NSM. My questions is how can I tell if the two NSM's (Mirror Multi-Site setup) are now in sync?
1 REPLY
Amar_Joshi
Honored Contributor

Re: Multi-site NSM in Sync?

Use the Hardware Information report to check the status of the RAID rebuild.
1. Select the Diagnostics category, and select the Hardware Information tab.
2. Click the Click to Refresh link, and scroll down to the RAID section of the Hardware report

See page 318 -
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02008676/c02008676.pdf