HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

Need to run a saniQ upgrade

phlyphishr
Occasional Visitor

Need to run a saniQ upgrade

Confused about software and upgrade path for a p4300 2 node SAN.  Currently at saniQ 8.5 and need to know how to get to ver. 9.5.  I have the HP 4000 Management Software ISO mounted but not sure if it is upgrading the CMC or the nodes.

2 REPLIES
phlyphishr
Occasional Visitor

Re: Need to run a saniQ upgrade

So I can see on Storage Nodes task on selecting the path to the software package but not sure where to get the software package.  Did not see it as part of the HP4000 Management Software ISO.

oikjn
Honored Contributor

Re: Need to run a saniQ upgrade

you first need to upgrade the CMC.  Everything (nodes and CMC) is done through the upgrade tab inside the running CMC instance.  Upgrade that and then you can upgrade the nodes.  You could also just uninstall your current CMC and use a new CD to install the CMC, but normally if you are staying current on your upgrades you never need to do that.  I started with 8.5 and have upgraded through to v10.