HPE Community
StoreVirtual Storage
1752782 Members
5676 Online
108789 Solutions
New Discussion

Need to run a saniQ upgrade

 
phlyphishr
Occasional Visitor

‎02-12-2013 09:01 AM

‎02-12-2013 09:01 AM

Need to run a saniQ upgrade

Confused about software and upgrade path for a p4300 2 node SAN.  Currently at saniQ 8.5 and need to know how to get to ver. 9.5.  I have the HP 4000 Management Software ISO mounted but not sure if it is upgrading the CMC or the nodes.

0 Kudos
Reply
2 REPLIES 2
phlyphishr
Occasional Visitor

‎02-12-2013 02:44 PM

‎02-12-2013 02:44 PM

Re: Need to run a saniQ upgrade

So I can see on Storage Nodes task on selecting the path to the software package but not sure where to get the software package.  Did not see it as part of the HP4000 Management Software ISO.

0 Kudos
Reply
oikjn
Honored Contributor

‎02-13-2013 07:19 AM

‎02-13-2013 07:19 AM

Re: Need to run a saniQ upgrade

you first need to upgrade the CMC.  Everything (nodes and CMC) is done through the upgrade tab inside the running CMC instance.  Upgrade that and then you can upgrade the nodes.  You could also just uninstall your current CMC and use a new CD to install the CMC, but normally if you are staying current on your upgrades you never need to do that.  I started with 8.5 and have upgraded through to v10.

 

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.