P4300 G2 Power Question

[MadOTC]

In the documentation for the P4300 G2 SANs we have, it lists the power supplies as Auto-switching universal 115/220 Volts.  I am trying to find out if these actually require 220, or if they would run on a 208V circuit, which is pretty typical for rack equipment these days.  Thanks for the help.  

P.S. This thread has been moevd from Storage Area Networks (SAN) (Enterprise) to HP StoreVirtual Storage / LeftHand. - Hp Forum Moderator

[Sbrown]

It's just basically a DL180 G6 with a SE1220 motherboard. It should run fine on 208v single phase  (not multi-phase lol).

[oikjn]

generally 220v signals that you are good on 208 or 240.  you will be fine with 208.