Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

Read-Only mode access via iSCSI from Veeam proxies

M. N.
Advisor

Read-Only mode access via iSCSI from Veeam proxies

I have an HPE LeftHand (p4xxx) infrastructure used to host the datastores managed by a VMware vSphere infrastructure.

LUNs are accessed via iSCSI from the ESXi hosts configured as a cluster.

I use Veeam Backup and replication to manage backup of VMs.

To speed up the backup I configured the physical Veeam server and the virtual Veeam proxies (all Windows Server 2008 R2) to access the same LUNs via iSCSI in Read only mode.

I have some trouble about the right configuration.

Is it correct setting the VMware cluster access the LUNs in read/write mode and the Veeam proxies in read only mode?

What additional settings should i implement to avoid possible damages to the datastores hosted by the LUNs?

Should I configure the Veeam proxies as single nodes or as a cluster?

Is there any further setting I should consider and/or apply?

Regards

M.N.

2 REPLIES
Stor_Mort
HPE Pro

Re: Read-Only mode access via iSCSI from Veeam proxies

Hi M.N.,

 

The VMware hosts need read/write access. It would be safest to configure volume access to the Microsoft Veeam host as read-only, if that does not interfere with the normal operation of the backup application. I would recommend starting with a single Microsoft host before undertaking a cluster configuration.

You can find additional information in these Veeam docs,

https://www.veeam.com/wp-veeam-configuration-guide-best-practices-hp-storage.html

https://helpcenter.veeam.com/backup/70/bp_vsphere/index.html

The Veeam Backup & Replication forum has much more information about this application than we can offer here.

https://forums.veeam.com/vmware-vsphere-f24/

 

I am an HPE employee - HPE StoreVirtual Support
fourg
Advisor

Re: Read-Only mode access via iSCSI from Veeam proxies

I have Veeam and HP StoreVirtual setup in the same way you do and yes you have it setup correctly.  My Veeam repositories are LUN's in a dedicated StoreVirtual cluster since I use older hardware as the backup destinations, but there is no reason why those LUN's couldn't be part of a cluster that other LUN's used for other purposes related to VMware VM's.