HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

Remote Copy - No Primary Global

Greg_IT
Occasional Advisor

Remote Copy - No Primary Global

I attempted to perform a remote copy to a site B and the copy does not work. I see in the state that the status is 'no primary global'. The error says 'The remote copy to 'sitea' is cluster 'cluster1' is blocked because the communication with the primary management group cannot be establised.

I am able to ping from the CMC from both sites. I have site A on one VLAN 192.168.20.55 with a gateway of 192.168.20.1. I have site B on one VLAN on 192.168.20.129 with a gateway of 192.168.20.128. So, I have the IP range split from .128 below with just different gateways.

Is this a network issue or a configuration issue?
2 REPLIES
Greg_IT
Occasional Advisor

Re: Remote Copy - No Primary Global

I re-sync the clocks on both sides and I checked the 'include primary volumes' and I think that fixed the issue.
Omer Ugur CANKUT
Occasional Contributor

Re: Remote Copy - No Primary Global

It's works for me, thanks.