HPE Community
StoreVirtual Storage
1752733 Members
5910 Online
108789 Solutions
New Discussion

SAN/iQ 8.0 to 8.1 Upgrade with iLO

 
aaron09
New Member

‎01-28-2010 07:09 AM - last edited on ‎05-25-2015 08:55 PM by

‎01-28-2010 07:09 AM - last edited on ‎05-25-2015 08:55 PM by

SAN/iQ 8.0 to 8.1 Upgrade with iLO

We have an Lefthand NSM 2120 SAN with SAN/iQ 8.0 and are going to upgrade it to 8.1 and apply the P400 RAID adapter, both which require reboots. I know that one of the reboots requires you to hit ctrl alt del to restart the SAN. We have iLO2 (not advanced)licensed so were able to send the remote restart. If we're able to send that instead of being there to hit ctrl alt del is the upgrade going to install correctly? Don't want to have to come in real late or early to just press ctrl alt del. Thank you for any support.

 

 

P.S. This thread has been moved from Storage Area Networks (SAN) (Enterprise) to HP StoreVirtual Storage / LeftHand. - Hp Forum Moderator

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.