SmartStart Firmware CD?

[Paul Hutchings]

Support are suggesting I use the SmartStart Firmware CD to ensure the iLO/RAID/HDD/BIOS etc. are up to date on our P4300/P4500 G2s.

Only thing is they aren't listed on the support matrix for the firmware CD/DVD, yet there is a PDF title " P4300 and P4500 Firmware Compatibility Matrix" which suggests to download and apply the SmartStart CD.

So basically, as usual, the documentation is rather contradictory :)

Has anyone used the SmartStart Firmware CD and did you have any issues with it?

I've asked support for more details on confirming it is supported.

[Joris Vliegen]

Hey Paul,

I've had the same advise from support before. I too was quite surprised to hear this. However this caused no issue's, and if my memory serves me well it even solved the problem I was having back then.

Kind regards,

Joris Vliegen

[Paul Hutchings]

Thanks Joris.  Support suggested the 9.3 SmartStart is the recommended one.

I know the P4000 is a DL180 but I was sure I'd read it was a custom board or something, but support were adamant that it's supported to use SmartStart to update the firmwares.

[Joris Vliegen]

Paul,

I'm not sure of you will be able to access this link:

http://h20272.www2.hp.com/Pages/spock2Html.aspx?htmlFile=hw_iscsi.html

However if you can access it you'll find the "P4300 and P4500 Firmware compatibility matrix".

Kind regards,

Joris Vliegen

[giladzzz]

Hi

there is a new driver firmware DVD from HP at

www.hp.com/go/spp this includes the firmwares you  need

also the files you download from the LH CMC interface includes also firmware updates

Zohar