Updating HP Lefthand VSA to 9.5

[Martin Thies]

Hery Guys,

I have an error updating my VSA 9.0 systems to VSA 9.5.

System environment:

3 ESX Hosts.

- 2 ESX Hosts running a VSA with about 1TB Storage attached

- 1 ESX Host running the FOM (Failover Manager)

Following steps are done:

- Both VSA are updated to 64Bit Hardware and actual VM Machine version

- I have added some disk space to Disk0 (4GB) and Disk1 (1GB) to provide enought local disk space for the firmware update

Initialiazing the update is going well. After some minutes, I receive t a error message:

"Installation failed. There was an error with the configuration, RAID, or memory. (Exit Status 85)"

Due to that error, no updates were performed.

Any idea??

Best regards

[Joris Vliegen]

Hey Martin,

Have you verified if the disk you gave to the VSA is on a separate virtual controller on lun 1:0.

Is there enough memory in your VSA? You can find the guidlines here:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01727958/c01727958.pdf

Kind regards,

Joris Vliegen

______________________________________________

If my post was useful, click on my KUDOS, "White Star".

[Martin Thies]

The hardwareconfiguration will be fine.

2 GB Ram für about 1TB-1,5TB HDD per VSA

2 vCPUs reserved per VSA

2 NICs reserved per VSA

Best regards

Martin Thies