HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

firmware 9.30

Ivanbre
Frequent Advisor

firmware 9.30

Hi,

 

I heard the firmware 9.30 is supported on p4300 nodes? I always tought that the CMC was the only option to install updates.

 

Is above correct?

2 REPLIES
Torsten.
Acclaimed Contributor

Re: firmware 9.30

AFAIK you can use this DVD for offline updates.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jitun
HPE Pro

Re: firmware 9.30

There are 5 firmwares, that can be upgarded on any P4000 units.

RAID Controller

SystemBIOS

LO-100

Drive Backplane

Disk Drives

 

All these can be upgarded using the Smart Firmware DVD.

This would be an Offline process.

 

As of Now One Can Upgrade RAID Controller Firmware for P400 and P410 which are on P4000 G1 and G2 along with NSM2120 G2, through CMC as Patches.

 

SystemBIOS can be upgraded through CMC as well, but only for P4000 G2 as Patches.

 

Hopefully in future all the above 5 Firmwares may be patches using CMC.

--------------------------------------------------------------
How to assign points? Click the KUDOS! star!