is it OK to install an HP NC552SFP 10Gb 2-port Ethernet Server Adapter into a P4500 LefHand SAN?

[WFPL4E]

Since the P4500 LeftHand SAN is in essence a DL180 G6 server, is it OK to install an HP NC552SFP 10Gb 2-port Ethernet Server Adapter into a P4500 LefHand SAN? - would it require special Driver that is different than its driver when installed in an H DL180 G6? - if yes, may you provide a link where I may download that driver?

The part number for the NC552SFP is: 614203-B21 

I appreciate anybody's feedback

Joe

[Stephan. · Accepted solution]

There is an upgrade option for 10GB 

BQ891A HP P4000 G2 10G BASE-SFP+ Upgrade Kit
NOTE: Use this kit to upgrade HP P4000 G2 Storage Systems (current model) to 10 GbE, and connect to a 10 GbE iSCSI network. It has 2 x 10GbE SFP+ ports per kit. One kit is needed for a Storage System, 2 kits are needed for a SAS Starter SAN / SATA Starter SAN / Virtualization SAN, 4 kits are needed for a Multi-Site SAN, and 5 kits are needed for a Scalable Capacity SAN. CABLES AND CONNECTORS NOT INCLUDED. For supported cables & connectors, please reference the NC550SFP QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13555_div/13555_div.html	

AX705A HP P4000 10G BASE-SFP+ Upgrade Kit
NOTE: Use this kit to upgrade HP LeftHand P4000 Storage Systems (previous model) to 10 GbE, and connect to a 10 GbE iSCSI network. It has 2 x 10GbE SFP+ ports per kit. One kit is needed for a Storage System, 2 kits are needed for a SAS Starter SAN / SATA Starter SAN / Virtualization SAN, and 4 kits are needed for a Multi-Site SAN. CABLES AND CONNECTORS NOT INCLUDED. For supported cables & connectors, please reference the NC550SFP QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13555_div/13555_div.html	

 nothing else is supported.