Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

missing stats from SANiQ 8.5 MIBs

teledata
Respected Contributor

missing stats from SANiQ 8.5 MIBs

clusModuleStatsIoLatencyRead
clusModuleStatsIoLatencyWrite

clusModuleStatsIOsRead
clusModuleStatsIOsWrite

clusModuleStatsKbytesRead
clusModuleStatsKbytesWrite

Can't query them anymore, and they are missing from the new LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB.mib

These counters are still available in the CMC, but now been removed from the SNMP stack. Any reason why HP would remove the ability to collect module statistics via SNMP?
http://www.tdonline.com
3 REPLIES
Bryan McMullan
Trusted Contributor

Re: missing stats from SANiQ 8.5 MIBs

My HP Sys Engineer contacted me a few weeks ago about SNMP use as they were looking into something, I thought with 8.5. So perhaps it is related....

Does the 8.1 MIBs work with it still? Perhaps it was just an oversite.
teledata
Respected Contributor

Re: missing stats from SANiQ 8.5 MIBs

The 8.1 mib still works, but of course those mentioned stats no longer report data.

I haven't updated the MIB files on my nagios server yet, because when I looked at the new mib and saw those counters missing, I didn't want to update the mib (because then I would loose those counters on my SANs that are still running 8.1)

I ran this up the support line with my local HP engineer too, so lets see if we can get some resolution. I'll post here if I discover anything.
http://www.tdonline.com
teledata
Respected Contributor

Re: missing stats from SANiQ 8.5 MIBs

Apparantly I was using deprecated OIDs..
The old ones have been deprecated from LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB.

The new OIDs are in LEFTHAND-NETWORKS-NSM-STORAGE-MIB

This is from the HP engineers:

"Customers should be using the following MIBs for all node-specific performance monitoring with SAN/iQ versions 8.x and higher."

"storageRaidStatsIOsRead" "1.3.6.1.4.1.9804.3.1.1.2.4.16"
"storageRaidStatsIOsWrite" "1.3.6.1.4.1.9804.3.1.1.2.4.17"
"storageRaidStatsKbytesRead" "1.3.6.1.4.1.9804.3.1.1.2.4.19"
"storageRaidStatsKbytesWrite" "1.3.6.1.4.1.9804.3.1.1.2.4.20"
"storageRaidStatsQDepthTotal" "1.3.6.1.4.1.9804.3.1.1.2.4.22"
"storageRaidStatsIoLatencyRead" "1.3.6.1.4.1.9804.3.1.1.2.4.23"
"storageRaidStatsIoLatencyWrite" "1.3.6.1.4.1.9804.3.1.1.2.4.24"

So for example, my SNMP query from my NAGIOS server now reads like this:

/usr/local/groundwork/nagios/libexec/check_snmp -H 10.0.0.10 -C public -P 2c -o LEFTHAND-NETWORKS-NSM-STORAGE-MIB::storageRaidStatsIOsRead.0

SNMP OK - 11376221610835968 | LEFTHAND-NETWORKS-NSM-STORAGE-MIB::storageRaidStatsIOsRead.0=11376221610835968c
http://www.tdonline.com