Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

vSphere SIOC w/mixed usage P4500's

Northwoods
Frequent Advisor

vSphere SIOC w/mixed usage P4500's

We are currently running six P4500's nodes to feed both our ESXi 4.1 install and a couple of physical servers with raw iSCSI mappings. To enable SIOC you need the spindles dedicated for vSphere to use which would imply either moving everything virtual (while my preference is not practical for a few years) or splitting the SAN into two clusters. I'm just wondering what have others done?

1 REPLY
lando_uk
Advisor

Re: vSphere SIOC w/mixed usage P4500's

From experience, its not a good idea to mix vmware and other `windows` workloads on the same cluster unless they are 10G nodes, even without using SIOC you'll experience weird latency problems. Because VMware hosts only read from a single node - If that node gets busy due to an external SQL job, it could cause slowdowns and latency problems on VMs in the datastore that uses that node as its gateway, and having SIOC monitoring IO wont help, as it only monitors IO within the esx environment and wont know about those external servers that might be using bandwidth.