Storage Boards Cleanup
To make it easier to find information about HPE Storage products and solutions, we are doing spring cleaning. This includes consolidation of some older boards, and a simpler structure that more accurately reflects how people use HPE Storage.
HPE StoreVirtual Storage / LeftHand
cancel
Showing results for 
Search instead for 
Did you mean: 

where can I set P4300G2 auto start

veekoyin
Occasional Visitor

where can I set P4300G2 auto start

Dear Expert,

I've HP StorageWorks P4300 G2 SAN, consist 2 Node of P4300 G2.

Both of them connecting UPS.

One day power outage, one node will auto start when power back, but the other one can not auto start.

So, where can I find to set the other node auto start? Is it in the BIOS setting?
BTW, how can I access to the node's bios?


Need ur help..

Regards,
veeko
3 REPLIES
teledata
Respected Contributor

Re: where can I set P4300G2 auto start

Yes, those settings should be in the HP BIOS.

You will need to use the iLO or a local console connection to make a change to the BIOS setting. If I recall it is F9 during bootup to access the BIOS.
http://www.tdonline.com
Cajuntank MS
Valued Contributor

Re: where can I set P4300G2 auto start

Don't mean to hijack your thread, but a follow up question for someone. Is there some gracefull auto shutdown process that can be implemented to tie to a UPS (APC), that's supported and or documented?
Cajuntank MS
Valued Contributor

Re: where can I set P4300G2 auto start

"Don't mean to hijack your thread, but a follow up question for someone. Is there some gracefull auto shutdown process that can be implemented to tie to a UPS (APC), that's supported and or documented"

Duh... it was in front of me the whole time. Please disregard.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01805622/c01805622.pdf