QSFP Configuration to Synergy 12000

[PeteLong]

Hi Ive got a 5412zl2 switch connected to a Synergy 12000 frame, this is how it's configured;

https://www.petenetlive.com/KB/Article/0001495

Its working fine but on the Switch Im seing this;

HP-Switch-5412Rzl2# show lacp

LACP

LACP Trunk Port LACP Admin Oper
Port Enabled Group Status Partner Status Key Key
----- ------- ------- ------- ------- ------- ------ ------
A2 Active Trk3 Up Yes Success 0 964
A3 Active Trk3 Blocked No Failure 0 964
A4 Active Trk3 Blocked No Failure 0 964
A5 Active Trk3 Blocked No Failure 0 964
B2 Active Trk3 Up Yes Success 0 964
B3 Active Trk3 Blocked No Failure 0 964
B4 Active Trk3 Blocked No Failure 0 964
B5 Active Trk3 Blocked No Failure 0 964

Why is A3-A5 and B2-B3 shown as Blocked and Failiure, all the links are passing traffic (admittedly 90% of the traffic is going over A2 and B2 but they are passing traffic?)

I'm guessing this is 'Normal' for an MPIO QSFP link, but I cant find any proof to present to the client.

[PeteLong]

Sill no reply?

Logged call with Aruba - they say the switch is fine, now waiting on Synergy Team.

Pete

PeteNetLive

[Sharis]

Hello Pete,

Could you please confirm the Uplink configurations from the Synergy end ?

Which uplink ports are configured ?

Whether the Uplinkset configured with all ports participating the LACP ?

What is the Link status of teh Uplink ports?

Regards,

[PeteLong]

Problem resolved - Interfaces Q1:2 to 4 (interconnect 3) and Q1:2 to 4 (Interconnect 6) had not been added to the uplink group

See 

HPe Synergy 12000 MPIO QSFP to 10GB SFP Setup

Pete

[Sharis]

Good to hear..

Thanks for update.