SAN Brocade & HPE SYNERGY switch compatibility

[Unibase]

Hello

We have the following configuration today:

• IBM FlashSystem 5200 Storage
• Switch SAN IBM B40 (Brocade 5100)
• Switch SAN IBM B24 (Brocade 300)

We are entering a SYNERGY to be part of this SAN with VirtualConnect 100, I wonder if there is compatibility with the 2 Switch SAN, if there is any prerequisite to be checked.

[AmRa]

Hi

Please refer HPE Synergy Frame Setup and Installation Guide

https://support.hpe.com/hpesc/public/docDisplay?docId=c05348240&page=GUID-DDC3F897-2FAB-4672-9841-59B3AF60205E.html

HPE Virtual Connect SE 100Gb F32 Module for Synergy quickspec.

https://www.hpe.com/psnow/doc/a00067745enw?jumpid=in_lit-psnow-red

[DanCernese]

All storage connectivity support is provided here: http://www.hpe.com/storage/spock

An HPE Passport account is required to enter the SPOCK website.  However, HPE does not generally qualify other vendor storage against Virtual Connect products, that responsibility remains with the storage vendor.