HPE Community
HPE Synergy
1752302 Members
4755 Online
108786 Solutions
New Discussion

Re: SY480 Gen10 AHCI mode

 
jlangmead
Regular Advisor

‎02-22-2021 11:48 PM

‎02-22-2021 11:48 PM

SY480 Gen10 AHCI mode

Hi

Does anyone know if AHCI mode is the default setting for Synergy compute modules?

If not is there any option to set this in the OneView server profile or can it only be done via the server bios?

thanks

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎02-23-2021 02:36 AM

‎02-23-2021 02:36 AM

Re: SY480 Gen10 AHCI mode

Depending on model and configuration drives are usually behind a (dynamic) smart array controller and you can create a RAID or use the plain disks.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.