HPE Synergy

SY480 Gen10 AHCI mode

 
jlangmead
Frequent Advisor

SY480 Gen10 AHCI mode

Hi

Does anyone know if AHCI mode is the default setting for Synergy compute modules?

If not is there any option to set this in the OneView server profile or can it only be done via the server bios?

thanks

1 REPLY 1
Torsten.
Acclaimed Contributor

Re: SY480 Gen10 AHCI mode

Depending on model and configuration drives are usually behind a (dynamic) smart array controller and you can create a RAID or use the plain disks.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!