IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

A change has been made to the running configuratio

MAIQUES
Occasional Advisor

A change has been made to the running configuratio

Hye,

I am surprised. I receive this message from 3ND.

A change has been made to the running configuration of the device. The

change was initiated via SNMP.

If i look at the switch 5500G I see :

%May 27 10:21:20:490 2009 G1 HWCM/5/TRAPLOG:- 2 -

1.3.6.1.4.1.43.45.1.6.10.2.1(h3cCfgManEventlog) configure changed:



EventIndex=268435460,CommandSource=2,ConfigSource=4,ConfigDestination=2



Who have change configuration ? Time server ? 3ND ?

What kind of configuration ?







Thanks for your help.
2 REPLIES
PapaDoc
Occasional Visitor

Re: A change has been made to the running configuratio

I don't think this is anything to worry about. These switches issue this trap when you enter system view even if you do not make a change.



The Doc
The Doc
MAIQUES
Occasional Advisor

Re: A change has been made to the running configuratio

Thanks for your help.

I don't remember have take a look to this switch at this time.

The surprise comes from the change was initiated from SNMP.

I have a community to write to SNMP.

May be change comes from NTP ?



Thanks.