IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

A5500's in IRF show in iMC as device model ICMP?

SOLVED
Go to solution
Thies Lämmke
Occasional Contributor

A5500's in IRF show in iMC as device model ICMP?

Hello,

I am pretty new to iMC and one of my first tasks is adding the devices. We have an IRF with two A5500, when I use 'add device' and enter the IP address or use 'auto discovery' the IRF is found, but shown as device type ICMP. This limits the configuration and monitor possibilities. What am I doing wrong?

Thies

2 REPLIES
johnk3r
Respected Contributor
Solution

Re: A5500's in IRF show in iMC as device model ICMP?

Hello !

 

You need to configure the SNMP parameters on Switch and IMC. If possible, set the telnet and ssh. But SNMP is extremely necessary.

Monitoring by ICMP will only make the IMC check if the device is responding to ping.

**************************************
ATP FLEXNETWORK V3 | ACSA
Thies Lämmke
Occasional Contributor

Re: A5500's in IRF show in iMC as device model ICMP?

SNMP was disabled on the IRF. After enabling it and adding the community strings, discovery worked without problems. Thank you very much for your help!