HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Backup HP 5500 switch with SNMP only

 
SOLVED
Go to solution
racowi
Frequent Advisor

Backup HP 5500 switch with SNMP only

Hi guys,

I'm trying to get the config file from a HPE 5500 but only with SNMP. 
The telnet and SSH are disabled on the device but the snmp is the only thing running and working. 

Can this be possible?

3 REPLIES
LindsayHill
Honored Contributor

Re: Backup HP 5500 switch with SNMP only

Do you have SNMP read-write configured on that device?

I'm not certain if you can trigger a backup using SNMP on Comware devices, but at a minimum you will need SNMP r/w.

Is there a good reason you want to do this? Are you locked out of the device, or is it someone else's gear?

racowi
Frequent Advisor

Re: Backup HP 5500 switch with SNMP only

Yes I have the R/W.
We manage the device but for some reason we are unable to ssh it using our username and password. I think one of the tech guy put a typo on the password or username before leave the place. The place is miles away from us, so I'm really want to save a long travel.

Thanks

racowi
Frequent Advisor
Solution

Re: Backup HP 5500 switch with SNMP only