IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Batch Operation: Interface Configuration: only 50 Interfaces or 10 devices

max2016
Occasional Contributor

Batch Operation: Interface Configuration: only 50 Interfaces or 10 devices

Hi,

I get an error message (see the attachment) when I want to tag more than 50 interfaces  or interfaces from more than 10 devices.

How I proceed:

Resource -> Batch Operation -> Interface Configuration Guide -> Operation List: VLAN (Add Ports to VLAN) -> Interfaces from our Port Group (Port Group with Uplink-Ports = 108 Interfaces from 60 devices)..

Is there an option, with which one you can increase these parameters / thresholds, that I can tag more interfaces from more devices, or why should you tag not more than these Interfaces in one step?

Thanks  :)

2 REPLIES
pattap
Regular Advisor

Re: Batch Operation: Interface Configuration: only 50 Interfaces or 10 devices

I've just tried on mine iMC PLAT 7.0, no problem with more than 50 at once. Maybe ti's limited with the license?

daveb42
Occasional Contributor

Re: Batch Operation: Interface Configuration: only 50 Interfaces or 10 devices

Are the VLAN databases identical across all of your devices?