IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Bulk Unmange Interfaces in IMC

DuncanPG
Occasional Visitor

Bulk Unmange Interfaces in IMC

I'm not interested in having any ports managed and being polled that are not either trunk or links to other switches/routers/firewalls.  Is there a way of bulk unamanaging interfaces on this basis, I'm already filtering on up/down alarms but just want to manage by exception on purely network equipment and not what is attached to the network (PCs, Servers etc.)

 

1 REPLY
LindsayHill
Honored Contributor

Re: Bulk Unmange Interfaces in IMC

Resource -> Performance Management -> Performance Option, click Monitor Option tab.

You'll probably only want "Interfaces connected to SNMP devices" selected. 

That will reduce performance monitoring load. 

If you've already filtered up/down alarms then you should be OK.