IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Check a particular snmp value with performance management

vincentmunier
Occasional Advisor

Check a particular snmp value with performance management

Hi,

i would like to check an snmp value and report an error when this value change. But it doesn't seems possible to check a particular value:

For instance, i check the snmp oid 1.3.6.1.2.1.15.3.1.2 (iso.org.dod.internet.mgmt.mib-2.15.3.bgpPeerEntry.bgpPeerState). The normal value of this oid is "6" (bgp peer connection established). So i would like to report an error for any value different from 6. The problem is, when modify index of my monitor to set tresholds alamrs, it's not possible to set a threshold like "different from 6" (i can only use < or >).... (see screenshoot below).

Have you any idea to do that?

Thanks !

Capture.JPG

1 REPLY
LindsayHill
Honored Contributor

Re: Check a particular snmp value with performance management

Hmm. What are the other possible values of that OIDS?

Wonder if you'll need 2 alarms, one for >6 and one for < 6?