Checkpoint 1430 monitoring

[lbusby1973]

Does anyone have issues monitoring checkpoint 1430 

imc can't seem to report ports speeds correctly depending upon the build version

Linux FW-xxx-xxx-01 3.10.20-al-5.0-pr2 #1 SMP Thu Dec 21 14:59:51 IST 2017 armv7l doesn't seem to work

Linux FW-xxx-xxx-01 3.10.20-al-5.0-pr2 #1 SMP Wed May 9 14:34:10 IDT 2018 armv7l does work

it doesn't seem to be able to differentiate between Lan1 (port) and Lan1 (switch)

any suggestions would be greatly appreciated

[jguse]

Hello,

This is usually caused by limited Firewall support for SNMP and/or non-standard implementations. IMC reads interface information from devices via the standard IF-MIB https://tools.ietf.org/html/rfc2863 http://www.net-snmp.org/docs/mibs/interfaces.html and I would suggest walking it on your Checkpoint manually and checking the output.

You could walk it via the MIB Management tool (Device Details > Action > MIB Management or System > Resource Management > MIB Management), then navigating through the hierarchy to the IF-MIB and right-clicking and selecting Walk. Alternatively using some other tool like net-snmp for the same thing.

Are you able to walk the MIB? If so, what does it report for those interface indexes under "ifSpeed" (1.3.6.1.2.1.2.2.1.5.x)? Note that speed here is reported in bps.