HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Device/Feature support for HP devices in HP IMC 5.1

 
nithish4u
Contributor

Device/Feature support for HP devices in HP IMC 5.1

Hello eveyone,

 

I recently purchased IMC 5.1 and also planning for  some HP devices which has full support in HP IMC 5.1(Couldnt take risk ;) ) . Do anyone has any document to share on this?

 

I got one for PCM  http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02664017/c02664017.pdf

 

But couldnt get any for IMC.

 

 

Cheers,

Nithish.

 

3 REPLIES
LindsayHill
Honored Contributor

Re: Device/Feature support for HP devices in HP IMC 5.1

There is no published document covering device support.

 

There are internal-only documents that list device support. Log a support case with the specific devices in question, and HP will tell you what level of support they have.

 

Or just post the models here, and people might be able to tell you if they have them working properly in IMC.

nithish4u
Contributor

Re: Device/Feature support for HP devices in HP IMC 5.1

 HI,

 

Can i know IMC support for the following devices.

 

1. A-series 10500

2. HP E5400
3. HP E8200 switches

4. cisco Nexus 7k

5. cisco Nexus 1k

6. Cisco 2800 ISR

7. HP 5406zl

 

Thanks in Advance.

 

Regards,

Nithish.

 

LindsayHill
Honored Contributor

Re: Device/Feature support for HP devices in HP IMC 5.1

All of those should be fine, except for the Nexus kit - I've seen IMC working with HP Comware and ProCurve kit, and Cisco 28xx and 29xx routers and Cisco IOS switches.

 

IMC 5.2 (released a couple of weeks back) now supports the Nexus 1K. I don't know about the Nexus 7K.

 

If you haven't already, I would recommend upgrading to IMC 5.2.