HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

HP IMC Monitoring of HP Proliant Server

 
Highlighted
julianmoe
Occasional Visitor

HP IMC Monitoring of HP Proliant Server

Hi!

I am trying to monitor a Proliant DL360 G3 via HP IMC in version 7.3.

The HP Insight Management Agent is installed on the server, to send SNMP traps. Sending a test-trap via the agent works. I can see the test-trap in IMC.

But I didn´t see traps about the drive status etc., only about the CPU, RAM or network status.

Please help and advise what I need to do to get IMC to monitor the drive status.

 

Thanks!

1 REPLY
LindsayHill
Honored Contributor

Re: HP IMC Monitoring of HP Proliant Server

IMC is probably not the best choice for monitoring servers. It _can_ be used for it, but you'll have to do a bit of work, since IMC is designed for monitoring network devices. You're probably better off using HPE SIM, or OneView if that's now ready to replace SIM.