IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE IMC 7.3 (E0605P4) and Aruba 8320 VSX: ISL LAG and ISL Keepalive reported status is Unknown.

Highlighted
parnassus
Honored Contributor

HPE IMC 7.3 (E0605P4) and Aruba 8320 VSX: ISL LAG and ISL Keepalive reported status is Unknown.

Hello, I've two Aruba 8320 switches deployed using VSX (Virtual Switching eXtension) running both ArubaOS-CX 10.01.0001.

I was able to successfully add both VSX's Switches (here Aruba-8320-1 and Aruba-8320-2) on HPE IMC using SNMPv3 but I see that lag128 - which, on both switches,  is the dedicated ISL LAG link - and the interface 1/1/48 - which, for both, is the ISL dedicated Keepalive link...are both shown in status "Unknown".

Question: is the HPE IMC actually able to represent VSX deployments based on ArubaOS-CX 10.01? 

VSX ISL (lag128 -- lag128):

HPE_IMC_7.3_E0605P4_SNMPv3_Aruba_8320_VSX_ISL_LAG_interface_status_10082018.png

VSX ISL (lag128 -- lag128) details:HPE_IMC_7.3_E0605P4_SNMPv3_Aruba_8320_VSX_ISL_LAG_interface_status_details_10082018.png

 

 

VSX ISL Keepalive (1/1/48 -- 1/1/48) details:

HPE_IMC_7.3_E0605P4_SNMPv3_Aruba_8320_VSX_ISL_Keepalive_interface_status_details_10082018.png

 VSX is clearly operational:

Aruba-8320-1# show vsx status
VSX Operational State
---------------------
  ISL channel             : In-Sync
  ISL mgmt channel        : operational
  Config Sync Status      : in-sync
  NAE                     : peer_reachable
  HTTPS Server            : peer_reachable

Attribute           Local               Peer
------------        --------            --------
ISL link            lag128              lag128
ISL version         2                   2
System MAC          d0:67:26:xx:xx:xx   d0:67:26:yy:yy:yy
Platform            8320                8320
Software Version    TL.10.01.0001       TL.10.01.0001
Device Role         primary             secondary

Kind regards, Davide.