1748002 Members
4465 Online
108757 Solutions
New Discussion

Re: HPE IMC Custom topology links

 
Snorre_JD
Occasional Visitor

HPE IMC Custom topology links

Hi, we have installed HP IMC in our business to control our different switches. We use "custom topology" for our dfferent locations. The different locations have different IP Scopes. At three of the locations i have drawed the map without problems. 

The last location we have "autodiscovered" all the switches. But we only get links between some of them. Do anyone have some ideas of what i could try to solve this? 

1 REPLY 1
NeilR
Esteemed Contributor

Re: HPE IMC Custom topology links

Start by checking that snmp was correctly specified for all devices that are in scope of your autodiscovery. If under resource > Device view you have ICMP shown under model, then these do not have snmp settings that match IMC.

IMC can't identify the interfaces w/o snmp access.