Hardware monitoring

[agmk]

how to configure HPE IMC to monitor SW modules and power supply, POE fault errors.

On SWs are configured SNMPv3

[SantoshPG]

Hi,
You will need to enable traps on the device and configure IMC as a trap receiver . The POE, PSU failure alarms etc are sent as traps to IMC from the device.

[agmk]

can you please provide some example let say for SW 5406Rzl2 J9850A and IMC version 7.2

i was trying to configure on IMC syslog templates, buti thing this thing depends on severity on devices.

[LindsayHill]

IMC should already have the trap configurations in place on the server side, for HPE switches. You just need to add the trap destinations to the switches.