Having problems backuping Avaya ERS 4850 and ERS4950 configuration

[rgausman]

Having problems backuping Avaya ERS 4850 and ERS4950 configuration via SSH & TFTP in IMC Configuration Center (ERS=Avaya Ethernet Routing Switch).

-----------------------------------------------------------------------------------

sysOID: 1.3.6.1.4.1.45.3.78.2 Device Model: Avaya ERS4850GTS-PWR-PLUS
Ethernet Routing Switch 4850GTS-PWR+ HW:14 FW:5.8.0.3 SW:v5.10.0.011 BN:11 (c) Avaya Networks

sysOID: 1.3.6.1.4.1.45.3.82.3 Device Model: Avaya ERS4950GTS
Ethernet Routing Switch 4950GTS HW:01 FW:7.1.0.5 SW:v7.1.0.007 BN:07 (c) Avaya Networks

sysOID: 1.3.6.1.4.1.45.3.82.4 Device Model: Avaya ERS4950GTS-PWR-PLUS
Ethernet Routing Switch 4950GTS-PWR+ HW:02 FW:7.2.0.5 SW:v7.2.0.213 BN:213 (c) Avaya Networks

Device configuration files manually backed up. Total: 1, backed up: 0, failures: 1.  

Device Name Device Model File Type Time Result Configuration File Name Details       2016-12-19 16:45:08 Back up configuration files. Total: 0, startup files: 0, running files: 0.     NS-STACK(192.168.2.80) Avaya ERS4850GTS-PWR-PLUS Startup 2016-12-19 16:45:07 Failed to execute script. --   NS-STACK(192.168.2.80) Avaya ERS4850GTS-PWR-PLUS Running 2016-12-19 16:45:07 Failed to execute script. --         2016-12-19 16:34:54 Starting to backup configuration files.

Index  Description  Result  Suggestion  Begin Time Finish Time 1 Initialize task parameters. Succeeded.   2016-12-19 16:34:55 2016-12-19 16:34:56 2 Back up device startup configuration file to iMC Server by script. Failed to execute script. 1.Please check if the script is correct.
2.Please check if the network connection to device is normal.
3.Please check if the (T)FTP Server is running.
4.Please check if the FTP username and password are correct. 2016-12-19 16:34:57 2016-12-19 16:45:07

----------[History What Was Done ]---------------------------------

(1) When discovering new switches, discovered as generic Nortel Network switches.  Found tech artilce to manual add sysOID to IMC 'System->DeviceDefinition' database.  Original set ERS4850 to 'Avaya' but while digging in the IMC server C:\Program Files\IMC\server\conf\adapters\ICC\Nortel networks folder, found '\NortelERS' folder.  Switched ther ERS4850-series switch definition to Nortel Ethernet Routing Switch.  

  Model Name:   Avaya ERS4850GTS-PWR-PLUS

  sysOID:      1.3.6.1.4.1.45.3.78.2

Vendor:   Nortel networks

 Series:  Nortel Ethernet Routing Switches

and

Model Name:  Avaya ERS4950GTS-PWR-PLUS

sysOID:   1.3.6.1.4.1.45.3.82.4

Vendor:  Avaya

 Series:  Avaya

 Category: Switches

(2) Configured the Avaya switch device settings...

Device Details

Device Label SW-STACK System Name SW-STACK Device Status NormalIP Address 192.168.2.80

Mask 255.255.255.0

sysOID 1.3.6.1.4.1.45.3.78.2

Device Model Avaya ERS4850GTS-PWR-PLUS

Login Type SSH

Device Category Switches [Stack]

System Description Ethernet Routing Switch 4850GTS-PWR+ HW:14 FW:5.8.0.3 SW:v5.10.0.011 BN:11 (c) Avaya

- Set SSNMP v2 READ/WRITE -> Tested OK

- Set SSH using RADIUS auth to an AD acct -> Test OK

- Change Login Type from 'Telnet' to 'SSH'

- Change Web Management from http/80 to https/443

(3) In 'ConfigCenter -> Options', add Avaya ERS switches to TFTP transfer

SW-STACK(192.168.2.80) Avaya ERS4850GTS-PWR-PLUS Configuration Backup        CLI Yes No No No SW-STACK(192.168.2.80) Avaya ERS4850GTS-PWR-PLUS Configuration Restoration CLI Yes No No No SW-STACK(192.168.2.80) Avaya ERS4850GTS-PWR-PLUS 192.168.2.80 TFTP

(4) On IMC server, C:\Program Files\IMC\server\bin> plink.exe -P 22 mgmt-imc@192.168.2.80

The server's host key is not cached in the registry. You have no guarantee that the server is the computer you
think it is. The server's rsa2 key fingerprint is:  ssh-rsa 2048 ae:95:ab:xxxxxxxxxxxxxxxxxxx
If you trust this host, enter "y" to add the key to PuTTY's cache and carry on connecting.
If you want to carry on connecting just once, without adding the key to the cache, enter "n".
If you do not trust this host, press Return to abandon the connection.
Store key in cache? (y/n) y
Using username "mgmt-imc".
mgmt-imc@192.168.2.80's password:
SW-STACK#

------------------------------------

So where do I go from here?  I am sucessfully backing up HP Procurve, Cisco 3750 and Aruba Controllers.  Have not been able to backup the new Avaya ERS switches and Adtran routers.

Any help would greatly be appreciated.  Thanks out to Lindsay Hall and Michael McNamara for their contributions regarding IMC and Avaya.

Any documentation for creating custom IMC adapters?

Bob Gausman

[rgausman]

Here is backup error message

[RPapaux]

Hi,

Look in the logfile (<IMC-InstalledDir>\Server\conf\log\imccfgbakdm) to get detailled information on the failure.

It is usually related to CLI issues.

Concerning the integration documentation the best I found is this white paper from Tomas Kubica.

https://www.netsvet.cz/wp-content/uploads/2015/10/hp-imc-customization-v0.28.pdf

The screeshots are a bite outdated, but the content is still relevant for IMC 7.2

Ray

[rgausman]

Thank you Ray for IMC Customization link.

Could not upload the extract contents from the 'imccfgbakdm' log file as a text file. So created two two jpg's and attach in the first message.  Did not think of just pasting into this message.  Here it is below...

It would be nice if IMC had a script debugger in which to watch script execution send/responses in realtime to test and verify scripts.

Thanks,

Bob G..

2016-12-19 16:12:57.498 [INFO (0)] [THREAD(5348)] [CCfgFileRestoreTask::processBackupTransferTaskResult()]Process backup transfer task result: { -- SEQUENCE --
result { -- SEQUENCE --
operStep 'ff'H --
,
result '00'H --
,
stepDetail ''H -- "" --
}
,
devID '033e'H --
,
strSession ''H -- "" --,
devDescr '53572d4e532d535441434b283137322e31392e322e383029'H -- "SW-STACK(192.168.2.80)" --,
transferResultList { -- AsnDevFileTransferResultSeqOf SEQUENCE OF is EMPTY
}

}

2016-12-19 16:12:57.500 [ERROR (18)] [THREAD(5348)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:12:57.500 [ERROR (18)] [THREAD(5348)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:12:57.501 [ERROR (44)] [THREAD(5348)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:12:57.502 [INFO (0)] [THREAD(5348)] [CComponentAdapter::isDevSupportServiceAction] dev_id: 830, adapter_name: NortelSwitch
2016-12-19 16:13:00.533 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:13:00.534 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:13:00.535 [ERROR (44)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:13:00.536 [INFO (0)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction] dev_id: 830, adapter_name: NortelSwitch
2016-12-19 16:13:00.547 [WARNING (102)] [THREAD(5288)] [CFileTransferTask::transferCfgFile] Fail to get item[ ConfFileSuffix ] in file[ C:\Program Files\IMC\server\bin\..\..\server\conf\adapters\ICC

\Nortel networks\NortelSwitch\NortelSwitch.conf ]
2016-12-19 16:13:00.548 [INFO (0)] [THREAD(5288)] [CThirdPartCfgfileMgr::backupRunning()] Begin to backup running cfgfile ...
2016-12-19 16:13:00.550 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Begin to execute, data: ServiceName = ConfigBackupActionName = backup_running_configInputParam =

TFTPFile=running_1936917912.cfg?_?TFTPServer=192.168.3.93?_?VpnName=OutputParam = CmdResp = ErrorMessage = ActionResult = 19
2016-12-19 16:13:00.551 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:13:00.554 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:13:00.555 [ERROR (44)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:13:00.556 [INFO (0)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction] dev_id: 830, adapter_name: NortelSwitch
2016-12-19 16:13:00.557 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Begin to execute by cli.
2016-12-19 16:13:00.558 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Case_no: 4592_1936917913, service_name: ConfigBackup, action_name: backup_running_config, input_vars: DevName=SW-STACK?_?

TFTPFile=running_1936917912.cfg?_?TFTPServer=192.168.3.93?_?VpnName=
2016-12-19 16:13:00.561 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Success to spawn process, pid: 9568
2016-12-19 16:18:00.574 [ERROR (-1)] [THREAD(5288)] [CScriptProcessor::exec()] Timeout to execute process, pid: 9568, ret_pid: 0
2016-12-19 16:18:01.580 [INFO (0)] [THREAD(5288)] [imcscriptttol] tcl log after timeout: =============================== Begin=============================
2016-12-19 16:18:01.580 [INFO (0)] [THREAD(5288)]
The server's host key is not cached in the registry. You
have no guarantee that the server is the computer you
think it is.
The server's rsa2 key fingerprint is:
ssh-rsa 2048 ae:95:ab:7c:2f:5c:39:8b:60:f8:12:9a:1b:c9:b7:a6
If you trust this host, enter "y" to add the key to
PuTTY's cache and carry on connecting.
If you want to carry on connecting just once, without
adding the key to the cache, enter "n".
If you do not trust this host, press Return to abandon the
connection.
Store key in cache? (y/n)
2016-12-19 16:18:01.580 [INFO (0)] [THREAD(5288)] [imcscriptttol] tcl log after timeout: =============================== End===============================
2016-12-19 16:18:01.580 [ERROR (-1)] [THREAD(5288)] [CScriptProcessor::processCfgLog] File :C:\Program Files\IMC\server\bin\..\..\server/tmp/scripttool_4592_1936917913_output.cfg can not open.
2016-12-19 16:18:02.582 [INFO (0)] [THREAD(5288)] [imcscriptttol] log: =============================== Begin=============================
2016-12-19 16:18:02.582 [INFO (0)] [THREAD(5288)]
2016-12-19 16:13:00.708 [INFO (0)] [THREAD(9040)] [qvdm::QvGetLogFileSize] get file size from qvdm.conf: 50
2016-12-19 16:13:00.708 [INFO (0)] [THREAD(9040)] [ScriptTool::execScriptAction()] component_name: ICC, service_name: ConfigBackup, action_name: backup_running_config, input_vars: DevName=SW-STACK?

_?TFTPFile=running_1936917912.cfg?_?TFTPServer=192.168.3.93?_?VpnName=
2016-12-19 16:13:00.725 [INFO (2001)] [THREAD(9040)] [CCLIScriptProcessor::init()] Device login type is 2,dev_id=830,AdaptName=NortelSwitch
2016-12-19 16:13:00.730 [INFO (-100)] [THREAD(9040)] [CSSHScriptProcessor::init()] Fail to call CSysPara::getPara() to get ssh_client.AdaptName=NortelSwitch
2016-12-19 16:13:00.730 [INFO (-100)] [THREAD(9040)] [CSSHScriptProcessor::init()] Fail to call CSysPara::getPara() to get sftp_client.AdaptName=NortelSwitch
2016-12-19 16:13:00.731 [INFO (0)] [THREAD(9040)] [CComponentAdapter::parseVendorAdapter()] Begin to parse ...
2016-12-19 16:13:00.736 [INFO (0)] [THREAD(9040)] [CComponentAdapter::parseVendorAdapter()] Finished to parse!
2016-12-19 16:13:00.975 [INFO (0)] [THREAD(9040)] [CCLIScriptProcessor::login_impl()] Begin ...
2016-12-19 16:13:00.975 [INFO (0)] [THREAD(9040)] [CCLIScriptProcessor::login()] Begin ...
2016-12-19 16:13:00.975 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Begin to exec: spawn plink.exe -P 22 mgmt-imc@192.168.2.80
2016-12-19 16:13:00.980 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Finished.
2016-12-19 16:13:00.980 [INFO (0)] [THREAD(9040)] [CTelnetScriptProcessor::gotoMode()] Begin, ip: 192.168.2.80, current mode: connect, new mode: initialize
2016-12-19 16:13:00.980 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Begin to exec: C:/Program Files/IMC/server/bin/../../server/conf/adapters/ICC/Nortel networks/NortelSwitch/clearup.tcl
2016-12-19 16:13:00.984 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Finished.
2016-12-19 16:13:00.984 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Begin to exec: C:/Program Files/IMC/server/bin/../../server/conf/adapters/ICC/Nortel networks/NortelSwitch/save.tcl

2016-12-19 16:13:01.001 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Finished.
2016-12-19 16:13:01.001 [INFO (0)] [THREAD(9040)] [CTelnetScriptProcessor::gotoMode()] Begin, ip: 192.168.2.80, current mode: connect, new mode: exec
2016-12-19 16:13:01.001 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Begin to exec: C:/Program Files/IMC/server/bin/../../server/conf/adapters/ICC/Nortel networks/NortelSwitch/initialize.tcl
2016-12-19 16:13:01.001 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Finished.
2016-12-19 16:13:01.001 [INFO (0)] [THREAD(9040)] [CTclExecutor::exec_impl()] Begin to exec: C:/Program Files/IMC/server/bin/../../server/conf/adapters/ICC/Nortel networks/NortelSwitch/enter_exec.tcl

2016-12-19 16:18:02.582 [INFO (0)] [THREAD(5288)] [imcscriptttol] log: =============================== End===============================
2016-12-19 16:18:02.582 [ERROR (10)] [THREAD(5288)] [CScriptProcessor::exec()] Failed to execute by cli method.
2016-12-19 16:18:02.582 [INFO (10)] [THREAD(5288)] [CScriptProcessor::exec()] Finished to execute, result:
ServiceName = ConfigBackupActionName = backup_running_configInputParam = DevName=SW-STACK?_?TFTPFile=running_1936917912.cfg?_?TFTPServer=192.168.3.93?_?VpnName=OutputParam = CmdResp = ErrorMessage =

ActionResult = 10
2016-12-19 16:18:02.582 [ERROR (10)] [THREAD(5288)] [CThirdPartCfgfileMgr::__backup()] Failed to call CScriptProcessor::exec().step_detail: , error_message:
2016-12-19 16:18:02.582 [INFO (6131)] [THREAD(5288)] [CThirdPartCfgfileMgr::backupRunning()] End to backup running cfgfile.
2016-12-19 16:18:03.586 [WARNING (2023)] [THREAD(5288)] [CScriptTool::getDevAdapterNameFromDB()] reader no data, sql: select vendor_name,adapter_name,error_code from tbl_dev_adapter where

component_name = 'Custom' and dev_id = 830 and adapter_type = 1
2016-12-19 16:18:03.588 [INFO (0)] [THREAD(5288)] [CComponentAdapter::parseVendorAdapter()] Begin to parse ...
2016-12-19 16:18:03.588 [ERROR (21)] [THREAD(5288)] [CComponentAdapter::parserVendorAdapterProcess] get Doc Node error, file: C:\Program Files\IMC\server\bin\..\..\server\conf\adapters\Custom\Nortel

networks\adapter-index.xml
2016-12-19 16:18:03.588 [INFO (0)] [THREAD(5288)] [CComponentAdapter::parseVendorAdapter()] Finished to parse!
2016-12-19 16:18:03.588 [WARNING (21)] [THREAD(5288)] [CComponentAdapter::discoverDeviceAdapter()] fail to call parserVendorAdapterIndex()
2016-12-19 16:18:03.591 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::getDevAdapterName()] fail to call discoverDeviceAdapter()
2016-12-19 16:18:03.591 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:18:03.591 [WARNING (2023)] [THREAD(5288)] [CScriptTool::getDevAdapterNameFromDB()] reader no data, sql: select vendor_name,adapter_name,error_code from tbl_dev_adapter where

component_name = 'Custom' and dev_id = 830 and adapter_type = 0
2016-12-19 16:18:03.596 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::getDevAdapterName()] fail to call discoverDeviceAdapter()
2016-12-19 16:18:03.596 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:18:03.596 [WARNING (2023)] [THREAD(5288)] [CScriptTool::getDevAdapterNameFromDB()] reader no data, sql: select vendor_name,adapter_name,error_code from tbl_dev_adapter where

component_name = 'ICC' and dev_id = 830 and adapter_type = 1
2016-12-19 16:18:03.598 [INFO (0)] [THREAD(5288)] [CComponentAdapter::parseVendorAdapter()] Begin to parse ...
2016-12-19 16:18:03.599 [INFO (0)] [THREAD(5288)] [CComponentAdapter::parseVendorAdapter()] Finished to parse!
2016-12-19 16:18:03.600 [WARNING (2001)] [THREAD(5288)] [CComponentAdapter::getSupportAdapter()] Not support thirdparty device,devID=830
2016-12-19 16:18:03.600 [WARNING (44)] [THREAD(5288)] [CComponentAdapter::discoverDeviceAdapter()] fail to call getSupportAdapter(),devID=830
2016-12-19 16:18:03.602 [ERROR (44)] [THREAD(5288)] [CComponentAdapter::getDevAdapterName()] fail to call discoverDeviceAdapter()
2016-12-19 16:18:03.602 [ERROR (44)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:18:03.602 [WARNING (2023)] [THREAD(5288)] [CScriptTool::getDevAdapterNameFromDB()] reader no data, sql: select vendor_name,adapter_name,error_code from tbl_dev_adapter where

component_name = 'ICC' and dev_id = 830 and adapter_type = 0
2016-12-19 16:18:03.604 [INFO (0)] [THREAD(5288)] [CComponentAdapter::parseVendorAdapter()] Begin to parse ...
2016-12-19 16:18:03.604 [INFO (0)] [THREAD(5288)] [CComponentAdapter::parseVendorAdapter]Vendor existed in memory.Do not need to parse again.vendor name = Nortel networks
2016-12-19 16:18:03.605 [INFO (0)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction] dev_id: 830, adapter_name: NortelSwitch
2016-12-19 16:18:03.617 [WARNING (102)] [THREAD(5288)] [CFileTransferTask::transferCfgFile] Fail to get item[ ConfFileSuffix ] in file[ C:\Program Files\IMC\server\bin\..\..\server\conf\adapters\ICC

\Nortel networks\NortelSwitch\NortelSwitch.conf ]
2016-12-19 16:18:03.618 [INFO (0)] [THREAD(5288)] [CThirdPartCfgfileMgr::backupStartup()] Begin to backup startup cfgfile ...
2016-12-19 16:18:03.619 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Begin to execute, data: ServiceName = ConfigBackupActionName = backup_startup_configInputParam =

TFTPFile=startup_1936920942.cfg?_?TFTPServer=192.168.3.93?_?VpnName=OutputParam = CmdResp = ErrorMessage = ActionResult = 19
2016-12-19 16:18:03.620 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:18:03.623 [ERROR (18)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:18:03.624 [ERROR (44)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction()] fail to call getDevAdapterName().DevID=830,ServiceName = ConfigBackup
2016-12-19 16:18:03.625 [INFO (0)] [THREAD(5288)] [CComponentAdapter::isDevSupportServiceAction] dev_id: 830, adapter_name: NortelSwitch
2016-12-19 16:18:03.625 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Begin to execute by cli.
2016-12-19 16:18:03.627 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Case_no: 4592_1936920943, service_name: ConfigBackup, action_name: backup_startup_config, input_vars: DevName=SW-STACK?_?

TFTPFile=startup_1936920942.cfg?_?TFTPServer=192.168.3.93?_?VpnName=
2016-12-19 16:18:03.630 [INFO (0)] [THREAD(5288)] [CScriptProcessor::exec()] Success to spawn process, pid: 9336

[rgausman]

(1)  Also forgot to ask want is the 'DevID' variable referenced in the 'imccfgbakdm' log?

getDevAdapterName().DevID=830

(2) Notice this in imccfgbakdm' log which is using /NortelSwitch/ scripts... 

Begin to exec: C:/Program Files/IMC/server/bin/../../server/conf/adapters/ICC/Nortel networks/NortelSwitch/enter_exec.tcl

and not custom device setup in IMC 'System->DeviceDefinition' database  Original set ERS4850 to 'Avaya' but while digging in the IMC server C:\Program Files\IMC\server\conf\adapters\ICC\Nortel networks folder, found '\NortelERS' folder.  Switched the ERS4850-series switch definition to Nortel Ethernet Routing Switch.  

  Model Name:   Avaya ERS4850GTS-PWR-PLUS

  sysOID:      1.3.6.1.4.1.45.3.78.2

Vendor:   Nortel networks

 Series:  Nortel Ethernet Routing Switches

(3) I am going to modify the Avaya ERS4850 Device Definition to 'Nortel Switch' and retest.

Bob G.

[rgausman]

Can someone confirm if there is any relationship to 'System Resource Management -> Device Definitions'  and the IMC servers  C:\Program Files\IMC\server\conf\adapters\ICC\%vendor%  scripts???

The more I look at the Configuration Backups,  the process is driven by using the Resource's sysOID to match a defined sysOID in the C:\Program Files\IMC\server\conf\adapters\ICC\%vendor%\adapter-index.xml files.  After a match is found, the corresponding sub folder's scripts are executed to do the actual configuration backup.

Correct?

.Bob G.

[Taz77RR]

hi, here are the files to save ERS Avaya/Extreme and Juniper FW:   Nortel Networks  & Juniper Networks 

but you have to modify the adapter-index.xml files:

you must add the correct sysOID according to the brand of your equipment

like this one:

<?xml version="1.0"?>
<!--sysoid adapt adapter-->
<adapters>
<type name="CLI">
<default>NortelSwitch</default>
<adapter name="NortelSwitch">
<description>Nortel switch</description>
<sysoid>1.3.6.1.4.1.45.3.52.1</sysoid>
<sysoid>1.3.6.1.4.1.45.3.71.6</sysoid>
<sysoid>1.3.6.1.4.1.45.3.74.1</sysoid>
<sysoid>1.3.6.1.4.1.45.3.74.2</sysoid>
<sysoid>1.3.6.1.4.1.45.3.74.3</sysoid>
<sysoid>1.3.6.1.4.1.45.3.74.4</sysoid>
<sysoid>1.3.6.1.4.1.45.3.74.5</sysoid>
<sysoid>1.3.6.1.4.1.45.3.79.1</sysoid>
<sysoid>1.3.6.1.4.1.45.3.80.1</sysoid>
<sysoid>1.3.6.1.4.1.45.3.80.2</sysoid>
<sysoid>1.3.6.1.4.1.45.3.80.3</sysoid>
<sysoid>1.3.6.1.4.1.45.3.80.6</sysoid>
<sysoid>1.3.6.1.4.1.26543.1.18.5</sysoid>  

<adapter name="NortelERS">
<description>Nortel Ethernet Routing Switch 2500, 8610, 8600 series, OS Version 4.0</description>
<sysoid>1.3.6.1.4.1.45.3.71.2</sysoid>
<sysoid>1.3.6.1.4.1.45.3.71.4</sysoid>
<sysoid>1.3.6.1.4.1.45.3.71.11</sysoid>
<sysoid>1.3.6.1.4.1.45.3.72.1</sysoid>
<sysoid>1.3.6.1.4.1.45.3.72.2</sysoid>
<sysoid>1.3.6.1.4.1.45.3.72.3</sysoid>
<sysoid>1.3.6.1.4.1.45.3.72.4</sysoid>
<sysoid>1.3.6.1.4.1.45.3.71.9</sysoid>
<sysoid>1.3.6.1.4.1.45.3.59.2</sysoid>
<sysoid>1.3.6.1.4.1.45.3.78.1</sysoid>
<sysoid>1.3.6.1.4.1.45.3.78.2</sysoid>
<sysoid>1.3.6.1.4.1.45.3.80.4</sysoid>
<sysoid>1.3.6.1.4.1.45.3.78.4</sysoid>
<sysoid>1.3.6.1.4.1.45.3.65</sysoid>
<sysoid>1.3.6.1.4.1.45.3.82.1</sysoid>
<sysoid>1.3.6.1.4.1.45.3.82.2</sysoid>
<sysoid>1.3.6.1.4.1.45.3.82.3</sysoid>
<sysoid>1.3.6.1.4.1.45.3.83.4</sysoid>
<sysoid>1.3.6.1.4.1.45.3.82.4</sysoid>
<sysoid>1.3.6.1.4.1.2272.207</sysoid>
<sysoid>1.3.6.1.4.1.2272.206</sysoid>
<sysoid>1.3.6.1.4.1.2272.210</sysoid>                                   <==== new add & save.

after modifiying the files, you have to reboot IMC

and you can test it !  Enjoy