1748240 Members
3775 Online
108759 Solutions
New Discussion

Help with IMC and switch privilege-mode

 
MohammadH
Regular Advisor

Help with IMC and switch privilege-mode

Hello

I want create user in imc for access the switch and set every user privilege level like some user only fiest level operator level and some operator level and i choose some coomd for the user to use and user with full access admin 

 

my question is what the best Module in the IMC for this ?

1- User Access Management Module

2- TACACS+ Authentication Manager

??

thank you

5 REPLIES 5
Thunder_China
Advisor

Re: Help with IMC and switch privilege-mode

TACACS+ is the right component that you should configure.
MohammadH
Regular Advisor

Re: Help with IMC and switch privilege-mode

Hello Thunder_China

thank you for replay

can i do the configure i want in  User Access Management Module ? the same in  TACACS+ or not ?

 

thank you

Thunder_China
Advisor

Re: Help with IMC and switch privilege-mode

UAM component focuses on how PC client accesses the network, and TAM(TACACS+ Authentication Manager) component focuses on what commands the user (telnet or ssh) can execute after login the device.
MohammadH
Regular Advisor

Re: Help with IMC and switch privilege-mode

Hello Thunder_China

so if i need to focuses on what commands the user use example (show vlan or sh ip ...) or which level (operator or manager) i need TAM(TACACS+ Authentication Manager  ?!!

 

Thank you

 

 

 

Thunder_China
Advisor

Re: Help with IMC and switch privilege-mode

Sorry, I am not very familar with TAM component, but I guess both of commands and level are supported.