IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

IMC 7.1 + MSM720 ap alarms

 
Poke2014
Occasional Visitor

IMC 7.1 + MSM720 ap alarms

I can't get any alarms to my IMC from MSM720 controller. For example if I shut down an access point, IMC shows it's offline but no alarm is generated. Tried to do some trap management but no help yet... Any succestions how this should be handled?

1 REPLY
Pack3tL0ss
Valued Contributor

Re: IMC 7.1 + MSM720 ap alarms

My guess is it's probably on the MSM side, I believe by default it doesn't send notifications/traps.  You need to not only enable IMC as the trap/notification receiver, but select notifications, and hit the "configure notifications" button to specify what to send.  Everything was unchecked on the one I looked at, so I believe that is the default.

 

Capture.JPG

 

Hope it helps,

PL