IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

IMC - Radius Server configuration : Failed to config domain 'x.y'

Arthis
Occasional Advisor

IMC - Radius Server configuration : Failed to config domain 'x.y'

iMC PLAT 5.2 (E0401)

 

Hi,

 

Just to let you know something I've just discovered.

 

With IMC, when configuring a Radius Server with a domain name that includes a dot (.) , the following message appears:

"Failed to config RADIUS server. Possible reason: Failed to config domain."

 

test.intra  -> FAILED

test-intra -> SUCCESS (with a slash (-) )

 

If someone managed to work with a dotted domain name and Radius, please let me know.

 

Herve

 

 

2 REPLIES
Peter_Debruyne
Honored Contributor

Re: IMC - Radius Server configuration : Failed to config domain 'x.y'

Hi,

 

not sure if I understand the issue correctly:

* Do you try to configure this on the device or

* Do you use an IMC template config push to the device

 

thanks,Peter

Arthis
Occasional Advisor

Re: IMC - Radius Server configuration : Failed to config domain 'x.y'

Hi,

 

I just want to configure the RADIUS server for access devices.

 

For this, I use the "RADIUS Server Configuration" link under the Device Management section on the selected device's "Device Details" page.

 

(see page 292 - HP Intelligent Management Center Base Platform Administrator Guide (iMC PLAT 5.2(E0401)).pdf for configuration detail).

 

Snap1.jpg

 

 

If you enter a domain name like "test-domain". The RADIUS configuration on the selected switch will be successful.

But if you enter  "test.domain" as a domain name, it fails.

 

I don't know why ?

 

Herve