IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

IMC Setting trap for POE information

 
SSHBOY
Occasional Contributor

IMC Setting trap for POE information

Hey guys,

so i create a new global index 

name : POE-Status

Measurement : Watts

Type : [index1[0]:pethPsePortDetectionStatus:1:0]

Instance Label (Definition OID) : 1.3.6.1.2.1.105.1.1.1.6.1

Formula : 1.3.6.1.2.1.105.1.1.1.6.1

 

the index is working in the testing phase when creating the index.

but when i plug it in a switch. no information is populating from the switch.

I think something is wrong with the Type field above.

Also i have stack switches, so the POE oid should be able to hit all the switch stack.

Please let me know if you can help me in anyway.

 

Thanks,

SSHBOY

3 REPLIES 3
network_king
HPE Pro

Re: IMC Setting trap for POE information

Hello,

 

Looks like the type should be  OID_pethPsePortDetectionStatus_0

pethPsePortDetectionStatus.0 : INTEGER
iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).powerEthernetMIB(105).pethObjects(1).pethPsePortTable(1).pethPsePortEntry(1).pethPsePortDetectionStatus(6).0

I am an HPE Employee

Accept or Kudo

SSHBOY
Occasional Contributor

Re: IMC Setting trap for POE information

when you say this, Looks like the type should be  OID_pethPsePortDetectionStatus_0. I am confused. sorry

should the type start like [index1[0]:xxxxxx:1:0]

please let me know how to change the type field. give me an example.

Also what is the differences in the instance label field and the formula field.

Thanks,

SSHBOY

 

SantoshPG
HPE Pro

Re: IMC Setting trap for POE information

Hi SSHBOY,

Is the monitor added to the device in IMC. 

There is a good video on adding custom index and also has step to add monitor to the device.  Link :- https://www.youtube.com/watch?v=GiOY09NYmF8

Thank you,
I am an HPE employee
-------------------------------------------------------------------------
Was the post useful? Click on Kudos Thumb below