IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

IMC not populating all of the learned MAC addresses

Jeremy_tx75
Occasional Collector

IMC not populating all of the learned MAC addresses

Hello,

I am running IMC plat 7.3 and we have a mixture of HP switches from 4000m to the 5400s. I have noticed when I try to do a MAC learning query on some of my switches, some of them are only displaying the MAC addresses learned from the uplink port. In this specific case, I am working with a 4000m switch and the MAC query displays a total of 2,224 MAC addresses however these are all learned from the uplink port.  when I telnet to the switch, all of the information is there, it is just not making it to IMC.  I am not sure if this is an issue with a config setting in IMC (possibly a max learned setting) or an issue with the switch sending all of the information needed.

Any ideas or suggestions would greatly be appreciated.

Thank You