IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

IP Address of Device Interface Changed

qos
Advisor

IP Address of Device Interface Changed

IP of interface "vlan x" changed from IP\MASKto "N/A".

 

I received this warning message for all VLANs on a switch but logging into the switch there is no change nor any entry in the log. After 12 hours I received the same message reversed from all VLANs on a switch.

 

I also sometimes get a warning message IP of interface "VLAN x" changed from IP\MASK ,0.0.0.0\255.255.255.255 to "IP/MASK", and the reverse a while later.

 

 

Is this a bug in the software? I'm running 5.2.

2 REPLIES
ofir_v
Occasional Visitor

Re: IP Address of Device Interface Changed

i have the same problem with cisco ASA configuered with snmpV3  and imc v7

i see in the ip address of the interfaces N/A

DirkSFT
Occasional Visitor

Re: IP Address of Device Interface Changed

Hi

We are using two HP 5820-AF-24XG as core switches and multiple HP 5130-48G-4SFP+ EI as access switches. All access switches did fire this warning:  IP of interface "InLoopBack0" changed from 127.0.0.1\255.0.0.0 to "N/A" in our iMC PLAT 7.2 (E0403P04). I am not really into iMC, so I would like to know what happened and if this is critical for us. For me it sounds like the Loopback address ist set to N/A. But why? We didn't change anything in configuration but Updated a few days ago from E0403 to E0403P04. Thanks in advance for any infomation.

Dirk