IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Idle IP detection pre-requisites.

axrosas
Occasional Contributor

Idle IP detection pre-requisites.

We have been looking to use the IP Address Allocation module within IMC. It seems to have it's pros and cons so we are weighing those out right now. However we are unable to get the Idle IP detection to work. There is very little documentation around this, and what the pre-requisites are for this to work? 

I have enabled the feature and set it to detect every hour but it never shows the IP as idle. Can anyone chime in on what needs to be configured for this to work?

Thanks in advance.

2 REPLIES
burak3129
Occasional Visitor

Re: Idle IP detection pre-requisites.

Hello Axrosas

-Click "Access Configuration" under Terminal Access menu.

- Then click "Unauthorized Access Processing Policy" in the bottom.

- You can enable "Idle IP Detection Processing Policy" here.

 

axrosas
Occasional Contributor

Re: Idle IP detection pre-requisites.

Thanks for the reply, that option was enabled.and never worked.