MSM460's within Device View

[vDummy]

Hi All,

I dont seem to have my AP's in my device list but if i drill down to the WSM manager I can find them through the resource management within the WSM module - I just tried to add them manually into the device using Add Device and specifying a IP but it doesnt find it as a SNMP device, and connects the device as a ICMP device.

The management controller which is on the same subnet is within connected andd shows up in device view so i know that items on that subnet are contactable.

SNMP is enabled via the controller (MSM760)

Within the resource management all details on the performance details are explained.

I am looking to setup alerting for them (Which is why i need them in the other view if i am correct)

Thanks

[vDummy · Accepted solution]

Never mind, i found how to get the alarms working from the AP's here:

http://h30499.www3.hp.com/t5/IMC/IMC-7-1-MSM720-ap-alarms/td-p/6646532#.VFpYtPmsWVN