NTA 7.3 Interface Traffic Analysis Task

[LOLOYR]

Hello

When creating "Interface Traffic Analysis Task" with a scpecific user account on IMC, the other user that able to connect to IMC didn't see this Task. Even if a task is done with the admin account, the other admin user no able to see that task. Is it a bug in version 7.3, it was not a problem in previous version 7.1 ?

[NeilR]

Make sure you have a reader group specified that everyone reading is a member of

[LOLOYR · Accepted solution]

Hello Neil,

The group you specified, is interface group, user group, or Operator group.

Thanks for your help

[NeilR]

The reader group(s) for an analysis task are selected from the System/Operator Groups. See screen shots attached.

After you create operators under System, assign them to one of the pre-defined groups (admin, maintainer, viewer) which have rights in the various modules. 

You can copy one and modify it to your needs. If the group has rights to the module, in this case NTA, then you can select them and add to the analysis task you created. If they don't have the rights then they would not be in the pick list.

[LOLOYR]

Thank you very much Neil for your support