Summary device information on network topology not appera

[febelus]

i'm looking for a strange think..... i've to different topology for layer 3 and layer 2 device.... When i double click on layer2 topology on a device appear a window with "device summury information" but when i double click on the same device or another in the layer3 topology this window not appear.... why??

[Brian_Dsouza]

Do you see the symptom across all browsers?

Please note that below are minimum requirements for the browsers to use IMC:

IE 10/11, Mozilla FF 50 and later, Chrome 44 and later. You should see this message on the login page too.

If the above is taken care of please share :

• Screenshots of the topologies with and without the problem.
• IMC version running : 

[febelus]

imc 7.3 e0506

all browser affected.

in attacchemnt one view that show summary with double clik and one view not show

[Brian_Dsouza]

@febelus Could you try opening iMC in incognito mode and test?