IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Summary device information on network topology not appera

 
febelus
Advisor

Summary device information on network topology not appera

i'm looking for a strange think..... i've to different topology for layer 3 and layer 2 device.... When i double click on layer2 topology on a device appear a window with "device summury information" but when i double click on the same device or another in the layer3 topology this window not appear.... why??

3 REPLIES 3
Brian_Dsouza
HPE Pro

Re: Summary device information on network topology not appera

Do you see the symptom across all browsers?

Please note that below are minimum requirements for the browsers to use IMC:

IE 10/11, Mozilla FF 50 and later, Chrome 44 and later. You should see this message on the login page too.

If the above is taken care of please share :

  • Screenshots of the topologies with and without the problem.
  • IMC version running : 

 

 

 

Accept or Kudo

febelus
Advisor

Re: Summary device information on network topology not appera

imc 7.3 e0506

all browser affected.

in attacchemnt one view that show summary with double clik and one view not show

Brian_Dsouza
HPE Pro

Re: Summary device information on network topology not appera

@febelus Could you try opening iMC in incognito mode and test?

 

Accept or Kudo