1748080 Members
5049 Online
108758 Solutions
New Discussion

Re: Syslog to Alarm in Version 7.3 E0705P02

 
SOLVED
Go to solution
Michael_Breuer
Esteemed Contributor

Syslog to Alarm in Version 7.3 E0705P02

Hello IMC Admins,

I would like to generate a Syslog to Alarm rule which was working fine in Version E0605. On a new system starting with E0705P02 I am not able to get any "Syslog to Alarm". Here is my config:

imc1.jpg

 

imc2.jpg

Syslog is arriving:

imc3.jpg

 But I don't get any Trap. I set the imcsyslogdm to debugging and this is my output:

2020-03-10 10:43:13.098 [DEBUG (0)] [THREAD(10368)] CGeneralRuleManager::process No rule matched with syslog Digest=[],Content=[<14>Mar 10 10:43:09 192.9.201.120 00574 chassis:  Ports PoE usage is below threshold of 80 %.]

On my working system running E0605 I am getting the following output:

2020-03-10 10:29:47.333 [DEBUG (0)] [THREAD(7188)] [CSyslogFilterManager::filter] receive msg: 10.1.17.2,<12>Mar 10 10:29:46 10.1.17.2 00572 chassis: Ports PoE usage has exceeded threshold of 1 %.
2020-03-10 10:29:47.577 [DEBUG (0)] [THREAD(6928)] [CSyslogDBWriter::svc]Time for loop
2020-03-10 10:29:47.586 [DEBUG (0)] [THREAD(6560)] [CGeneralRuleManager::send_trap()] send syslog trap, faultdmip = 127.0.0.1.
2020-03-10 10:29:47.587 [DEBUG (0)] [THREAD(6560)] CGeneralRuleManager::send_trap(), 1.3.6.1.4.1.25506.4.2.8.2.0.20.

Is anyone aware of changes in E0705P02?

Best Regards,

Michael

 

Ingentive Networks GmbH
1 REPLY 1
Michael_Breuer
Esteemed Contributor
Solution

Re: Syslog to Alarm in Version 7.3 E0705P02

I got it: After restarting imcsyslogdm.exe it is working. 

Ingentive Networks GmbH