IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

Use IMC to turn POE on and off for a stack

 
AmityAdmin
Occasional Contributor

Use IMC to turn POE on and off for a stack

I am trying to find away I can use IMC to turn POE off and on for every port within a stack through the IMC. Doess anyone have any idea as to how I can do this? I am currently doing it through CLI but would like to use IMC and if possible be able to schedule IMC to do this at certain times.

Thanks for any help.

Kevin

3 REPLIES
LindsayHill
Honored Contributor

Re: Use IMC to turn POE on and off for a stack

Look in the Admin Guide for "Using batch mode to implement energy saving policies" - it may do what you want.

pattap
Regular Advisor

Re: Use IMC to turn POE on and off for a stack

Or you can create a configuration template (service>configuration center>configuration templates) then you could select your devices that you want POE to be on/off and schedule your template to be ran at certain times, as per below

Capture.JPG

AmityAdmin
Occasional Contributor

Re: Use IMC to turn POE on and off for a stack

Thanks, I  will give this a try.