HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

enable interface list in cisco router

 
goldwine
Occasional Advisor

enable interface list in cisco router

I need to monitor a cisco router, but IMC does not show inteface list, how do I enable it?

 

it show 0 interface list

 

http://www.casimages.es/i/140507094037765804.png.html

 

any idea?

thanks

2 REPLIES
LindsayHill
Honored Contributor

Re: enable interface list in cisco router

Since you don't have any sysContact, sysLocation or Runtime listed, you almost certainly don't have SNMP working. Does IMC display the correct device model?

 

I would be checking your SNMP config (ACLs on device, community list/SNMPv3 config, IMC SNMP config, firewalls, etc. The usual stuff).

 

Sort that out, and the interfaces will show up.

goldwine
Occasional Advisor

Re: enable interface list in cisco router

thanks,
the problem was in the second layer of FW