IMC
cancel
Showing results for 
Search instead for 
Did you mean: 

iMC alarm display/showing not existing interface number

 
Dawit_Zeru
Contributor

iMC alarm display/showing not existing interface number

Hi All,

 

i'm a bit confiused i'm reciving alrams via email and for some reaseon the iMC is sending email about interface down but the interface number is not matching the any interface in the switch

for example:

here is the alarm with non exsiting interface

[Critical]The interface 46 is DOWN

the switch is 5940 runing Boot image: flash:/5940-cmw710-boot-r2510p01.bin

and there isnt any 46 interface the right syntex is 1/x

1 REPLY 1
network_king
HPE Pro

Re: iMC alarm display/showing not existing interface number

Hello Dati_Zeru,

What does it look like inside iMC? A interface down would be a trap. So you should be able to trace it from the trap to the alarm &  see what the trap actually claims the port number is. 

See in iMC Alarm -> Alarm Browse and Alarm -> Trap Management in the Gui

I am an HPE Employee

Accept or Kudo