1748204 Members
4077 Online
108759 Solutions
New Discussion

switch access binding action delay

 
itgraham
Occasional Contributor

switch access binding action delay

I have an aruba 2530 and have been testing the use of switch access binding via imc.  I've configured the mac address and set the access control to shutdown the port when a conflict is detected.  However the actual process of shutting down the port can take up to 40 minutes to occur after I plug a device in with a different mac address.  I've set the pollling on the switch to 60 seconds.  Is there a way to speed up the detection and action?

1 REPLY 1
Nitish_N
HPE Pro

Re: switch access binding action delay

Hi,

Have you tried the option of shutting down the interface immediately once iMC detects violation. Option is under Resource > Access Configuration > Unauthorized Access Processing Policy. 

-N


Accept or Kudo