HP Comware 5130 with Polycom lync ip phone cx 300 - 500 - 600

[waelagina]

Dears,

I have HP comware JG937A 5130 switch and need to connect polycom phones.

the phones didnt get voice vlan auto and keep working on native vlan only

i am using lldp and below two configuration on two different ports but both not working, Any Idea ?

data vlan 2 - voice vlan 3

Global Configuration:

Use the first part of the MAC address of the Lync phones

===================

voice-vlan mac-address 0008-2100-0000 mask ffff-ff00-0000 description Lync-phones

Configuration for IP Telephony port - A port connected to

IP phone vlan 3 or end User vlan 2 or both together vlans 2 and 3

===============================

Option A – Trunk Port

==================

interface GigabitEthernet1/0/X

poe enable

port link-type trunk

undo port trunk permit vlan 1

port trunk permit vlan 2 3

 port trunk pvid vlan 2

undo voice-vlan mode auto

voice-vlan 3 enable

stp edged-port

lldp compliance admin-status cdp txrx

#

Option A – Hybrid Port

==================

interface GigabitEthernet1/0/X

port link-type hybrid

undo port hybrid vlan 1

port hybrid vlan 2 untag

 port hybrid pvid vlan 2

undo voice-vlan mode auto

lldp compliance admin-status cdp txrx

voice-vlan 3 enable

poe enable

stp edged-port

#