IP Phones
cancel
Showing results for 
Search instead for 
Did you mean: 

how to get cisco 7911 to work hp A5120 24G

ccak
Visitor

how to get cisco 7911 to work hp A5120 24G

i want to get my cisco 7911 to work on my HP A5120 24G switch. Any help/advice welocme

 

thank you

 

ccak

5 REPLIES
Fredrik Lönnman
Honored Contributor

Re: how to get cisco 7911 to work hp A5120 24G

Tell us what exactly is the problem? There should be no general compatibility issues with this setup, except the obvious fact that you wont be able to provision the phone with CDP.

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

ccak
Visitor

Re: how to get cisco 7911 to work hp A5120 24G

When l plug the phone to the switch  the phone just says registering, this goes on.

 

Do l need to use the OUI address.Is the OUI address the mac address of the phone.

 

thanks

 

ccak

 

Fredrik Lönnman
Honored Contributor

Re: how to get cisco 7911 to work hp A5120 24G

How is the switchport configured? And how is the phone configured? As I said you cannot rely on CDP to do the voice VLAN configuration on HP-gear, if it doesnt support LLDP-MED you'd have to configure the phone manually.

 

The OUI is the first three parts of the mac address, but im not sure on what you mean that you will need it.. need it for what?

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

ccak
Visitor

Re: how to get cisco 7911 to work hp A5120 24G

The switch has LLDP -Med  to all ports. i have configure the voice vlan for 2822 for our network, but it just sits there saying registering.

 

Thanks

 

ccak

Fredrik Lönnman
Honored Contributor

Re: how to get cisco 7911 to work hp A5120 24G

Is the 7911 configured to support LLDP-MED? Look around in the menus and see if you can find something. And please paste the relevant config from your switch.

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S